Home > Air Tools, Electric Tools and Chisels > Rear and Side Exhaust Air Polishers >

Max Pro Pneumatic Wet Polisher
Weha Pneumatic Pro Wet Polisher


 
Alternative Views:

Distributors With Direct Website Links

Weha has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-940-0115 for assistance. Or, you can find this product online at the above distributor websites:
Weha Price: $385.00

Charlotte, NC Stock Status:In Stock

Part Number: 150800
Qty:

DESCRIPTION TECHNICAL
 

4" Max Pro Pneumatic Wet Grinder

The Max Pro Water-Feed Air Sander/Polisher is a heavy duty polisher designed for power. Yet, it is engineered to be operated with less fatigue. Use it for wet sanding and/or polishing of stone surfaces made of stone. This product page covers the technical specs, the operation instructions and the care and maintenance of the Max Pro polisher.

Intended Use

This Water-Feed Air Sander/Polisher is of heavy duty construction and extremely powerful. The side handle and head cover reduce fatigue at operation. It is great for wet sanding and polishing of marble and stone, for trim work and much more.

For safety reasons, it is essential to read the entire instruction manual before first operating the Max Pro and to observe all the instructions.

Technical Specifications

  • Backing Pad: 4"
  • Sanding Disc: 4"
  • Spindle Size: 5/8"-11
  • Max No Load Speed: 5,000 RPM
  • Avg. Air Consumption: 5.75 CFM @ 90 PSI
  • Operating Pressure: 90 PSI
  • Air Inlet: 1/4"
  • Recommended Air Hose Size (ID): 3/8"

Preparation

Before beginning assembly or operation of the Max Pro, make sure that all parts are present. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact the distributor or sales agent for replacement.

Care and Maintenance

The tool should be lubricated daily (or before each use) with air tool oil(not included).

  1. Disconnect the tool from air supply.
  2. Place a few drops of air tool oil onto the air inlet.
  3. Connect the tool to the air supply. RUn the tool without load for a few seconds to distribute the oil through the tool.
  4. After operating the tool and before storing the tool, disconnect the air hose and place 4 or 5 drops of air tool oil into the air inlet, then re-connect the sir hose and run the tool to evenly distribute the oil throughout the tool for about 30 seconds. This prolongs tool life.
  5. Avoid storing the Max Pro air polisher in a humid environment which promotes rusting of the internal mechanisms. Always oil the Max Pro before storing it.
  6. When the Max Pro has reached its end of life or is seriously damaged, it should be left in a resource recycling can and never dropped into fire.

Rate this product. Be the first to write a review »