Home > Installation Accessories > Counter Top Brackets and Overhang Support
Stone Support Brackets

Weha Countertop Support Brackets

Weha Stone Support Brackets are constructed for all stone types and hardnesses; for example our floating countertop support brackets are designed for use on:

  • Granite
  • Marble
  • Quartz
  • Quartzite
  • Engineered Stone
  • Concrete

Made to replace corbels on natural and engineered stone materials that make up overhangs and kitchen islands, Weha has a brace and support for just about every use.

Most installations require 3 support brackets because they are made to be spaced between 18"-24" apart. As a result, Weha has conveniently packed the counter top support braces in 3 packs with all the necessary screws included. This gives you 4 screws per counter top brace bracket in the package.

Features of Weha Stone Braces

Each set of 3 floating counter top brackets are shrink wrapped with the screws. This allows the installer to grab a counter top bracket set and take it to the install without scratching the brackets or the brackets sliding around in the truck. It also eliminates showing up to the install without the screws because of forgetting to grab them before leaving the shop. Simply take into the kitchen, open the pack, and everything is provided for a quick, scratch free install.

Each Floating Counter Top Support Bracket comes with 6 countersink holes. This allows the bracket to be adjusted up to 2 1/4" if needed.The provided screws will finish flush with the granite support bracket. Each Counter Top Support Bracket is powder coated gloss black for a high end black polished finish.

One edge of the counter top brace is flat and the other end is back beveled with slightly rounded corners. There are no sharp edges for the homeowner to scratch or cut themselves. And the bevel provides a nice touch transition from the bracket to the stone.

Weha also decided to go with a full 1/4" thick counter top brace bracket. The 3/16" brackets are just too flimsy and allows too much flex in the brace. However, the 1/4" thick counter top bracket provides a solid stiff bracket that will fully support the overhang without flexing.

Weha produces the Counter Top Support Bracket at 2 1/2" wide. This width gives plenty of structural support. And when placed at seams it gives a full 1 1/4" wide support on each piece of stone.

Uses for Weha Stone Brackets

Weha Counter Top Support Brackets can be used with virtually any type of stone material. Some of the approved materials for support braces include:

  • Granite
  • Marble
  • Corian
  • Soapstone
  • Engineered Stone
  • Quartz
  • Limestone
  • Quartzite
  • Solid Surface
  • Concrete
  • All Substrates

All Weha Counter Top Support Brackets provide the correct and proper support needed for granite and stone overhangs.

The Weha Counter Top Support Brackets come in the following lengths:

Available Stone Brackets

We offer the following brackets for supporting stone overhangs on your stone fabrication jobs. Even though we have labeled each length as belonging to one particular type of stone, all of our natural and engineered stone support braces are made to work with any of your stone materials that are for countertop and worktop surfaces.

L Brackets for Stone Materials

In addition to support braces, we are in fact providers of L-shaped brackets for stone as well. In fact, L-shaped Stone Support Brackets are available in the following lengths:

While you are here, why not pick up the necessary sink clips and brackets for the countertop installation as well?

Sort By:
Page of 1