Home > Z Profiles >

CD30 Position 2 CNC Wheel
Part # XT-CD30C2MG CD 30 Z Profile CNC Pos 2 Electroplated Granite & Stone


 
Alternative Views:



Charlotte, NC Stock Status:In Stock
Part Number: XT-CD30C2MG
Qty:

DESCRIPTION WHERE TO BUY
 

Smoothing Profiling Tool for Granite - CD30 Position 2

This CNC tool executes the granite smoothing by removing the slab's roughness. Additionally, the CD30 profiling tools for granite maintains the the geometry of the profile even on very hard materials such as granite. This result is due to the use of materials such as the steel core of the CD30 Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.

Main Characteristics

The characteristics of the CD30 for smoothing granite are:

  • Perfect Profile Geometry
  • Long Life Abrasive Power
  • Excellent Preparation for the Finishing Phase

The following tables provide you with the measurements of the CD30 Granite Smoothing wheel and the specification of the granite profiling wheels wheels respectively.

CD30 Specifications
Max D 70mm CD30 Polishing Wheel for Granite
Min D 70mm
Height 36mm
Rad 0mm
Bore 35mm
Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G

0

5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min

Rate this product. Be the first to write a review »