Home > Z Profiles >

CD30 Position 3 CNC Wheel
Part # XT-CD30EXC3 CD 30 Z Profile CNC Pos 3 Electroplated Granite & Stone


 
Alternative Views:



Charlotte, NC Stock Status:In Stock
Part Number: XT-CD30EXC3
Qty:

DESCRIPTION WHERE TO BUY
 

CD30 Position 3 Granite Finishing Tool

The CD30 tool executes the finishing phase on the granite. This phase plays a vital role in the slab's working process and is important to obtainingan excellent final result since it is the bridge between the grinding process and the polishing process.

The CD30 Position 3 for granite has a steel core with high tolerance. the extra-fine abrasive diamond powderis laid through a an electroplating process at high density. This results in a granite finishing tool with extreme stiffness and an excellent finishing of the profile, preparing it for the polishing phase of the process.

Main Characteristics

The following features of the CD30 tools are as follows:

  • Finishing of the Profile Geometry
  • Perfect Finishing of the Profile
  • Optimization for the Polishing Phase

The following tables provide you with the measurements of the CD30 Granite Finishing wheel and the specification of the granite profiling wheels wheels respectively.

CD30 Specifications
Max D 70mm CD30 Polishing Wheel for Granite
Min D 70mm
Height 36mm
Rad 0mm
Bore 35mm
Granite Profiling Wheels
Position Stock Removal Rotating Speed Feed Rate mm/min Feed Rate inch/min
0G 0 5500 RPM 800-4000 mm/min 32-160 inch/min
1G

0

5500 RPM 800-5000 mm/min 32-200 inch/min
2MG 0.019 inch (0.5 mm) 5500 RPM 800-4000 mm/min 32-200 inch/min
EXC3 0.011 inch (0.3 mm) 5500 RPM 800-5000 mm/min 32-200 inch/min
4 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
5 0.003 inch (0.1 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min
6 0.0019 inch (0.05 mm) 3000 RPM 600-5000 mm/min 24-200 inch/min

Rate this product. Be the first to write a review »