Home > CD Profiles > CD30 >

CD30 Position 2 CNC Wheel
Part # XT-CD30FG20C2MG Position 2 1/2 Gas CD30 Marble/Granite Smoothing  Tool


 
Weha Price: $369.36

Charlotte, NC Stock Status:(Out of Stock)
Part Number: XT-CD30FG20C2MG
Qty:

DESCRIPTION WHERE TO BUY
 

Smoothing Profiling Tool for Marble/Granite - CD30 Position 2

This CNC tool executes the marble/granite smoothing by removing the slab's roughness. Additionally, the CD30 profiling tools for marble/granite work on very hard materials such as granite or engineered stone. This result is due to the use of materials such as the steel core of the CD30 Marble/Granite Smoothing tool. The electrolytic process that is used to to lay ther diamond powder also contributes to the results of the tool. It is very important that this tools is used before passing to the rectifying phase.

Main Characteristics

The characteristics of the CD30 for smoothing marble/granite are:

  • Perfect Profile Geometry
  • Long Life Abrasive Power
  • Excellent Preparation for the Finishing Phase

The following tables provide you with the measurements of the CD30 Marble/Granite Smoothing bit and the specification of the marble/granite profiling bits respectively.

CD30 Specifications
Max D20mmCD30 Smoothing  Bit for Marble/Granite
Min D20mm
  
  
  
  
  
  
Marble/Granite Profiling Wheels
PositionStock RemovalRotating SpeedFeed Rate mm/minFeed Rate inch/min
0G05500 RPM800-4000 mm/min32-160 inch/min
1G

0

5500 RPM800-5000 mm/min32-200 inch/min
2MG0.019 inch (0.5 mm)5500 RPM800-4000 mm/min32-200 inch/min
EXC30.011 inch (0.3 mm)5500 RPM800-5000 mm/min32-200 inch/min
40.003 inch (0.1 mm)3000 RPM600-5000 mm/min24-200 inch/min
50.003 inch (0.1 mm)3000 RPM600-5000 mm/min24-200 inch/min
60.0019 inch (0.05 mm)3000 RPM600-5000 mm/min24-200 inch/min

Rate this product. Be the first to write a review »