Speed ☆☆☆☆ Lifetime ☆☆☆☆☆
Materials: Ceramic, Porcelain Gres
Easy to Grind Without Removing the Blade
The grinding nut makes a ceramic edge of excellent quality in only a few seconds. Innovative patented product. The grinding nut is screwed onto the spindle of the angle grinder, clamping the cutting diamond disk instead of the usual nut.
The diamond layer on the end surface of the nut turns it into a full-fledged diamond cutter. This scheme allows you to sand the edge of ceramic tiles immediately after cutting. This makes the process incredibly convenient and productive. Effectively works with both wall ceramic tiles and durable stoneware.
The mill is made in two versions
- with coarse grain 70/80 for rough grinding, removal of a large amount of material
- with 100/120 grain for fine finishing work
Used on angle grinders d.5" with a rotational speed of 11000 rpm without cooling. The nut mill has an M14, 5/8' thread for attaching to the angle grinder. The diamond layer has a lead-in chamfer for a smooth incision into the material.
Characteristics
|
Diameter
|
2 in.
|
|
Landing Hole
|
M14
|
|
Cooling
|
Without cooling
|
|
Grain
|
100
|
|
Purpose
|
Ceramic, Porcelain gres
|
|
Brand
|
Distar
|