Home > Bush Hammer >

Support Bracket 40 x 30mm
Part # 6313430 Support Bracket  40 x 30mm


 

Product price is not filled in. This product cannot be purchased.


Charlotte, NC Stock Status:(Out of Stock)
Part Number: 6313430
Qty:

DESCRIPTION WHERE TO BUY
 

40 mm x 30 mm Support For Roller

The 40 mm x 30 mm Support For Roller is a tool in the bushhammering line of equipment designed to work in conjunction with other bushhammering texturing tools from Weha.

This 40 mm x 30 mm Support For Roller is designed to be used in conjunction with the following bushammering tool lines:

  • Stock-Master
  • Blaster
  • Granite-Master

Granite-Master Bushhammering Tool

The Granite-Master is a tool for bushhammering sandstone and granite natural materials. The tool proudces the following bushhammering finishes:

  • Fine
  • Medium
  • Coarse

270 mm & 300 mm Tools

The 270 mm and 300 mm diameter tools can be mounted to manual or automatic polishing machines for slab processing or to floor polishing machines.

450 mm & 670 mm Tools

The 450 mm and 670 mm diameter tools can be mounted on automatic slab polishing machines or on belt polisher for wide stripe sections.

Mount the rotary bushhammering tool on the polishing machine tool holder and operate as with an ordinary grinding wheel.

Innovative features (such as grease nipples, modular system) and the high quality components allow an exceptional cost:performance ratio of the tools.

Stock-Master Technical Information

Technical Specifics
Diameter 270 mm 300 mm 450 mm 670 mm
Rollers 4 6 12 18
Bits On Each Roll 15|30 15|30 15|30 15|30
Productivity m2/h
Fine Bushhammering Up To 7 Up To 13 Up To 27 Up To 40
Medium Bushhammering Up To 11 Up To 21 Up To 45 Up To 72
Coarse Bushhammering Up To 15 Up To 29 Up To 82 Up To 110
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.

Blaster Technical Information

Technical Specifics
Diameter 270 mm 300 mm 450 mm 670 mm
Rollers 4 6 12 18
Productivity m2/h Up To 15 Up To 22 Up To 30 Up To 45
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.

Granite-Master Technical Information

Technical Specifics
Diameter 270 mm 300 mm 450 mm 450 mm
Rollers 4 6 9 12
Productivity m2/h Up To 9 Up To 13 Up To 20 Up To 27
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.
  • Very Easy to Use
  • Includes Mounting Accessories & Technical Instructions
  • Suitable for Very Thin & Defective Slabs
  • Perfectly Even Bushhammering Design On Entire Surface
  • High Productivity With Minimal Investment

Rate this product. Be the first to write a review »