Home > Bush Hammer >

12 Bit Replacement Planet Unit
12 Bit Replacement Planet Unit


 

Part Number: 6311480
Qty:

DESCRIPTION WHERE TO BUY
 

12 Bit Replacement Planet Unit

The 12 Bit Replacement Planet Unit is a tool in the bushhammering line of equipment designed to work in conjunction with other bushhammering texturing tools from Weha.

This 12 Bit Replacement Planet Unit is designed to be used in conjunction with the following bushammering tool lines:

  • Junior-Fakir
  • Full-Fakir
  • Kanten-Fakir

Kanten-Fakir Bushhammering Plate

The adjustable bushhammering plate Kanten-Fakir can be fit to a belt polisher for fine or medium bushhammering on limestone, sandstone or marble.

We recommend creating the bevel before bushhammering the straight edges.

On some profile polishing machines, it is possible to edit the bullnose bushhammering through the use of a plate with two rollers.

Limestone & Marble

For use on limestone and marble, we recommend rollers with 12 bits.

Sandstone

For the treatment of sandstone only rollers with 24 bits are suitable.

Innovative features (such as grease nipples, modular system) and the high quality components allow an exceptional cost:performance ratio of these tools.

Junior-Fakir Technical Information

Technical Specifics
  Junior-Fakir 3/12 Junior-Fakir 4/12
  Junior-Fakir 3/24 Junior-Fakir 4/24
Different Bushhammering Results 2 2
Various Surfaces to Bushhammer 3 3
Adjustable Width of Bushhammered Stripe 5-10 cm 4-15 cm
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.

Full-Fakir Technical Information

Technical Specifics
  Full-Fakir 3/12 Full-Fakir 4/12
  Full-Fakir 3/24 Full-Fakir 4/24
Different Bushhammering Results 3 3
Various Surfaces to Bushhammer 5 5
Adjustable Width of Bushhammered Stripe 5-10 cm 4-15 cm
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.

Kanten-Fakir Technical Information

Technical Specifics
    Kanten-Fakir 3/12 Kanten-Fakir 4/12
  Kanten-Fakir 2/24 Kanten-Fakir 3/24 Kanten-Fakir 4/24
Different Bushhammering Results 2 2 2
Various Surfaces to Bushhammer 2 2 2
Adjustable Width of Bushhammered Stripe 5-10 cm 4-15 cm
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.
  • Very Easy to Use
  • Includes Mounting Accessories and Technical Instruction
  • Perfectly Even Bushhammering On Entire Surface
  • High Productivity With Minimal Investment

Rate this product. Be the first to write a review »