Home >

Achilli TFR-A Saw
Part# 14470 Achilli TFR A Bridge Saw for cutting granite, natural, and engineered stone


 
Alternative Views:


Distributors With Direct Website Links

Weha has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-940-0115 for assistance. Or, you can find this product online at the above distributor websites:

Weha Price: $26,241.60

Charlotte, NC Stock Status:In Stock

Part Number: 14470
Qty:

DESCRIPTION
 
Achilli TFR A Bridge Saw 10' 8" Cut Fixed Bridge.

The Achilli TFR A Granite and Stone Bridge Saw is the perfect solution for a shop producing Granite, Quartz, Quartzite, Stone Kitchens.

Or for high production shops that need extra cutting and fabrication speed.

The TFR A Bridge Saw is excellent for production work.

This Granite and Stone Bridge Tilts at a 45 Degree for full length angle cuts. The head of the saw doesn't tilt. But the entire beam system will tilt. This is a true advantage because there are no bearings, or moving parts on the bridge of the saw or the motor that can loosen to lose the exact miter cut. The Achilli TFR A Bridge Saw has two knobs that you will loosen. Then the entire bridge will easily rotate to a 45 degree.

The Achilli TFR A Bridge Saw comes standard with Pop-up Rollers. The hydraulic pop up rollers allow the stone to be easily moved, turned, and positioned on the TFR. You will be amazed at how much easier these pop up rollers make loading and adjusting the stone counter tops and slabs.

Achilli Pop Up Rollers

The TFR also offers an optional Water tank and recycling pump. The Water Tanks sets underneath the saw and recirculates back to the blade to conserve and recycle water. This reduces water use, keeps the flow of water controlled, and ensures the correct flow of water to the blade. The water tank and water pump bolts to the Achilli TFR frame. It does not sit on the floor. This allows the floor to be cleaned underneath the saw. Plus this pushes the tank closer to the saw bed to recover the majority of water. Also by being bolted to the machine, it keeps the tank and pump from being damaged. The pump will automatically turn on when the main motor is started and will turn off when the motor shuts off.

The Achilli TFR A Bridge Saw accepts 10", 12" and 14" Bridge Saw Blades .

The AChilli TFR Bridge Saw also includes side extensions that can be mounted on either side of the TFR. This allows a total width of 56", easily accommodating full slabs.

A standard feature of the Achilli TFR A Bridge Saw is the Laser that comes with it. This premium grade laser is the same laser used on all of the Achilli Bridge Saws

The Achilli TFR A comes with a seperate motor for Z Axis blade height adjustment with power adjustment from the control panel. This allows step cutting, plunge cutting, and depth control for straight and miter cuts

The Control Panel that mounts onto the TFR offers full operational control of the saw.

1) Emergency Safety on/off button

2) X Axis travel. Automatic travel with variable speed control. X axis travel can be stopped at the end of the cut,

3) Z Axis blade height raise and lower adjustment. Power Y axis adjustment for blade height and plunge cut.

4) Laser on/off button

5) Main motor on/off

6) Reset

The Achilli TFR A Bridge Saw comes with very stout 5.5 HP motor. This motor will power through 3cm material without slowing down or losing power.

TECHNICAL DATA:Length of cut: 10' 8" (130") (3300mm)

Diamond Blade size: 10",12, 14"

Blade Arbor size: 1" (25.4mm)

Motor: 5.5 HP (4 kw) 220 v 3 phaseMotor. 30 Amp Breaker required

RPM: 3400 rpm

Total length: 14'8" (178")

Width of cutting table: 36"

Total width(without side tables) 47"

Total width with side extensions on 1 side: 56"

Total width with side extensions on both sides: 76"

Total height: 69"

Net Weight(without accessories) 1575 lbs

MACHINE STRUCTURE:Sturdy and compact structure (no foundations required).

Set up is as simple as leveling and wiring the 220V three phase motor into the buildings power.

Painted with epoxy powder coat finish for years of useE-chains to protect and guide moving cables

WORKTABLE STRUCTURE:Work table fabricated in galvanized steel rails for indefinite use.

HEAD:Motorized head travel with variable speed from 0-21 ft/min for both forward and reverse

X-axis variable speed by inverter.

Z-axis cutting depth is power driven for height adjustment

Manual bridge tilt from 90° to 45° to carry out Miter/bevel cutting.

Water tank with built-in recycling pump.

MAIN ELECTRICAL PANEL:

Main isolator switch

Emergency stop push-button

"RESET" power-on button

Main motor start/stop button

Head forward and reverse variable speed controls

Head forward and reverse control buttons

Emergency stop push-button on head

INCLUDED EXTRA FEATURES ALREADY INSTALLED ON THE TFR BRIDGE SAW:

Hydraulic pop-up Rollers:To easy slab loading and positioningRoller table with 32 omni-directional rollerspop up rollers rais and lower by hydraulic pump(included)

Laser:A laser Diode Mounted on the headShows Blade cutting lineRed Laser colordrastically increases set up time

1 Side Stop (Squaring Bar)

2 adjustable limit switch stops

1 set of service wrenches

User and maintenance manual

OPTIONS FOR THE TFR BRIDGE SAW:

1. Water Collection and Recycling System: Water Tray that sits under the saw to collect the water for recirculation. Comes with Water Pump that pumps the water from the water tray back to the blade. $1370.00

2. Side Extension Table with Rollers: 60" x 35" Side Extension Table equipped with rollers to facilitate slab movement $975.00

The side extension bolts to the side of the saw to add width to stabilize full slabsCan be mounted on both sides of the saw

Width of cutting table: 36"

Total width with side extensions on 1 side: 56"

Total width with side extensions on both sides: 76"

INSTALLATION:

The TFR A Bridge Saw does not require professional installation.

Simply level the Bridge SawWire into the building.

Fill water tank with waterInstall blade (we recommend the Weha 14" Matrix blade)

Warranty: 12 monthsAchilli has the right to repair or replace fee of charge any mechanical part proven to have a manufacturing defect after being inspected by its technicians, while electrical and electronic components are covered by warranty only if the defects are acknowledge as such by the respective manufacturers.

Includes a Free 14" Blade

Payments as low as $429.00 per month!

Fast. Flexible. Financing.

1. Financing, leasing and working capital loans

2. Application-only up to $250,000

3. Instant credit decisions

4. Simple one-page finance document

It's that easy!

Weha Financing Quote Weha Finance Application

Financing provided by:

Ships from Charlotte, NC

Also contact your local distributor for availability

Achilli TFR Bridge Saw cutting 2" thick stone at 4 1/2' per minute
Achilli TFR Granite Bridge Saw Pop Up Rollers
Achilli TFR Granite Bridge Saw
Achilli TFR Granite, Marble, Stone Saw

Rate this product. Be the first to write a review »