Home > Bush Hammer >

18 Roller Plate (670 mm) With 15 Bit Rollers
18 Roller Plate (670 mm) With 15 Bit Rollers


 
Alternative Views:


Distributors With Direct Website Links

Weha has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-940-0115 for assistance. Or, you can find this product online at the above distributor websites:

Weha Price: $4,641.30

Charlotte, NC Stock Status:(Out of Stock)

Part Number: 6310160
Qty:

DESCRIPTION
 

18 Roller Plate (670 mm) With 15 Bit Rollers

The 18 Roller Plate (670 mm) With 15 Bit Rollers is a tool in the bushhammering line of equipment designed to work in conjunction with other bushhammering texturing tools from Weha.

This 18 Roller Plate (670 mm) With 15 Bit Rollers is designed to be used in conjunction with the following bushammering tool lines:

  • Stock-Master

Stock-Master Bushhammering Tool

The Stock-Master is a tool for bushhammering sandstone, limestone, and marble to the following consistencies.

  • Fine
  • Medium
  • Coarse

For the use on limestone and marble, we recommend rollers with 15 or 30 bits. For the treatment of sandstone only rollers with 30 bits are suitable.

270 mm and 300 mm Tools

270 mm and 300 mm diameter tools can be mounted on manual or automatic polishing machines for slab processing or on floor polishing machines.

450 mm & 670 mm Tools

Diameter 450 mm and 670 mm can be mounted on automatic slab polishing machine or on belt polisher for wide stripe sections.

Mount the rotary bushhammering tool on the tool holder of the polishing machine. Set the required bushhammering result by changing the support position, and then operate with an ordinary grinding wheel.

Innovative features (such as grease nipples, modular system) and the high quality components allow an exceptional cost/performance ratio of the tools.

Stock-Master Technical Information

Technical Specifics
Diameter 270 mm 300 mm 450 mm 670 mm
Rollers 4 6 12 18
Bits On Each Roll 15|30 15|30 15|30 15|30
Productivity m 2 /h
Fine Bushhammering Up To 7 Up To 13 Up To 27 Up To 40
Medium Bushhammering Up To 11 Up To 21 Up To 45 Up To 72
Coarse Bushhammering Up To 15 Up To 29 Up To 82 Up To 110
Tool life is according to the materials to be worked on.
The noise level is very low, compared to the other traditional tools.
  • Very Easy to Use
  • Includes Mounting & Technical Instructions
  • Also Suitable In Very Thin & Defective Slabs
  • Perfectly Even Bushhammering On Entire Surface
  • High Productivity With Minimal Investment

Rate this product. Be the first to write a review »